|
|
| |
|
| |
|
STAX SR-202 Basic employs polymer film manufactured with new material, signal follow-up properties are enhanced resulting in a high resolution, smooth sound. |
| |
|
| |
| |
|
| |
| Type |
:Push-Pull Electrostatic Open-Back Earspeaker |
| Frequency Response |
:7 - 41,000Hz |
| Impedance |
:132k Ohms (10kHz) |
| Sensitivity |
:100dB / 100V r.m.s. 1 kHz |
| Bias Voltage |
:580V DC |
| Left & Right Channel Identification |
Displayed on headband ARC section |
| Ear Pads |
:Crafted from high class artificial leather for durability and comfort. |
| Cable |
:Low capacity, LC-OCC (Low Capacitance Oxygen-Free Copper Conductor) 2.5m/8.2ft |
| Ambient Temperature & Humidity |
:0 to 35ºC / 90% max. without condensation |
| Weight |
:10.6oz without cable / 15.9oz with cables |
| SRS-3010 System |
 |
|
| |
|
|
SRM-310 Solid-State Driver |
|
|
|
|
| |
| |
The circuit configuration takes over the pure-balance, A Class, all-stage DC amplifier configuration developed by STAX in the past to drive our Electrostatic Earspeakers. A push-pull signal is obtained by low-noise FET input OP Amp, for ICL input. The output stage consists of a simple inverting amplifier based on low-noise FETs and high voltage transistors.
|
| |
|
| |
| |
SRM-310's new sleek design allows the amplifier to act as a headphone stand when not in use. Opening on the top also allows for neat cable storage. |
| |
|
| |
| |
The SRM-310 adopted the regulated power for clear sound in bias voltage and power supply. |
| |
|
| |
| |
Attachment of parallel input and output terminals make with connection to an amplifier for loudspeaker and earspeakers |
| |
|
| |
|
|
|
| Type |
All-stage semi conductors, Low noise FET input Class A operation, Pure balance DC amplifier configuration Pro bias earspeaker driver unit |
| Frequency Response |
:4 to 60kHz / +0, -3dB with SR-202 |
| High Frequency Distortion |
:Less than 0.02% with 1kHz, 100V r.m.s. with SR-202 |
| Gain |
:54dB |
| Input Terminal |
:1 RCA with parallel out |
| Rated Input Level |
:200mV (with 100V output) |
| Input Impedance |
:50Kohm |
| Max. Output Voltage |
:350V r.m.s. (1kHz) |
| Standard Bias Voltage |
:PRO 580V x 2 |
| Operating Power Voltage Frequency |
:117V (50Hz / 60Hz) |
| Power Consumption |
:10W |
| Ambient Temperature & Humidity |
:0 to 35ºC / 90% max. without condensation |
| External Dimensions |
:5.12 (W bottom) 3.35 (W) x 10.83 (H) x 3.35 (D) in |
| Weight |
:3.75lbs |
| SRS-3010 System |
|
SRS-3010 System
Suggested Retail |
:$990 |
| |
|
| |
This page subject to change without notice
|
|
SR-202 Specification