| |
SR-003 Open-Back Electrostatic In-The-Earspeaker |
|
|
| |
|
| |
|
Following the success of the SR-001 In-The-earspeaker system, a world wide first, STAX are proud to announce the SRS-005 system for Home Audio use. STAX has received many requests for Earspeakers that can produce many hours of comfortable listening without compromising sound quality. |
| |
|
| |
| |
The STAX SR-003 is the home audio version of S-001 MK2 Earspeaker with a 5-pin plug connector suitable for any STAX driver unit or adaptor with "Pro" capability. |
| |
|
| |
| |
As the SR-003 is In-The-Earspeakers, comfort is enhanced leaving the ears clear of all external restrictions and perspiration that may result from heavy earpad typed. |
| |
|
| |
| |
|
| |
| Type |
:Push-Pull Electrostatic canal-type In-The-Earspeaker |
| Frequency Response |
:20 - 1kHz +/- 2dB, 1kHz to 20kHz +/- 4dB |
| Impedance |
:360k Ohms (10kHz) |
| Sensitivity |
:111dB / 100V r.m.s. 1 kHz |
| Bias Voltage |
:580V DC |
| Left & Right Channel Identification |
Displayed inside the detachable body. Left: Solid line on cable Right: Dotted line on cable |
| Ear Pads |
:Silicone earbuds in two sizes |
| Cable |
:Low capacity, LC-OFC 1.5m / 4.9ft |
| Ambient Temperature & Humidity |
:0 to 35ºC / 90% max. without condensation |
| Weight |
:0.4oz |
| SRS-005II |
: |
|
| |
|
|
SRM-252II Solid-State Driver |
|
|
|
|
| |
| |
STAX SRM-252II is a new product that responds to new generation media such as SACD and DVD Audio while at the same time raising the quality of each individual parts. The reproduction frequency band has been increased to 35,000Hz. The body is made from a plentiful quality of extruded aluminum.. |
| |
|
| |
| |
Parallel out terminals have been newly incorporated for greater ease of use. It's now possible to connect the input directly to a power amplifier or other device. |
| |
|
|
|
| Frequency Response |
:DC to 35kHz (40V r.m.s. Output SR-202) |
| Total Harmonic Distortion |
: 0.01% (with 1kHz, 100V r.m.s. Output SR-202) |
| Gain |
:54dB |
| Rated Input Level |
:200mV (with 100V output) |
| Input Impedance |
:50Kohm |
| Max. Output Voltage |
:280V r.m.s. |
| Standard Bias Voltage |
:PRO 580V |
| Power Consumption |
:DC12V 4W |
| Ambient Temperature & Humidity |
:0 to 40 ºC without condensation |
| External Dimensions |
:5.2 (W) x 1.5 (H) x 5.2 (D) in |
| Weight |
:1.2lbs |
| SRS-005II |
|
| |
This page subject to change without notice
|
|
SR-003 Specification